home *** CD-ROM | disk | FTP | other *** search
- Path: newshost.uwo.ca!usenet
- From: quigs@mother.com (Jason Quigley)
- Newsgroups: comp.sys.amiga.hardware
- Subject: Re: Dell hi-density floppy drive woes
- Date: Sun, 14 Jan 96 23:31:27
- Organization: London and Region Amiga Users
- Message-ID: <19960114.7BE9480.1500E@mother.com>
- NNTP-Posting-Host: ts7-15.slip.uwo.ca
- X-Authenticated: djfraser@ts7-15.slip.uwo.ca
-
- Greg Bengeult wrote:
-
- > I would very much appreciate it if someone who owns one of these
- > [Dells] could look carefully at the connector and tell me which way it goes
- > in
-
- The end that goes into the Dell has a resistor about 1.5 CM in from the edge
- on the side of the connector that faces up. Also there is come writing etched
- lightly at the far left tip of the connector if it's facing away from you and
- you're looking at its topside.
-
- Quigs
-